Roland D-50 - Replacement Keys, Spare parts for service and repair


Out of stock
Aftertouch strip for Roland synthesizer/keyboard, good condition
SKU:
AT-001
Shipping weight:
0,50 kg
35,99 € *
Item out of stock
Out of stock
Bender for Roland D-50 synthesizer/keyboard spare part/replacement
Original Part 23275824
SKU:
PM-005
HAN:
23275824
Shipping weight:
0,20 kg
39,95 € *
Item out of stock
In stock
All keys are used, cleaned and deyellowed if necessary.
Depending on the environmental conditions, keys can age differently, so we cannot guarantee absolute color consistency with your existing keyboard.
Condition: Good solid shape - some normal age and play wear.
SKU:
KB-005G
Variations in:
  • KB-005G
Shipping weight:
0,28 kg
Item weight:
0,10 kg
from
0,58 € *
112 In stock
In stock
Rubber Foot for Roland synthesizer/keyboard, good condition,
Original Part: 12359105
Diameter: 2,1cm
Height: 1cm
SKU:
RF-001
Shipping weight:
0,20 kg
1,99 € *
18 In stock
Delivery time: 3 - 5 Workdays
In stock
Joystick for Roland D-50 synthesizer/keyboard spare part/replacement
Original Part 13279823
SKU:
PM-006
HAN:
13279823
Shipping weight:
0,50 kg
45,95 € *
3 In stock
Delivery time: 3 - 5 Workdays
In stock

Keyboard contact board 29 note Hi for synthesizer.
Original used part in good condition.
The circuit board has been tested by us and is fully functional. You receive a one-year warranty on this board.
The warranty expires after damage to or removal of the void seal, therefore an exchange or return of this board is excluded.

Important information! Electronic assemblies are sensitive to electrostatic charge.
Please observe the regulations on ESD handling.
Replacing the circuit board requires detailed specialist knowledge and may only be carried out by specially trained personnel. If you do not have this qualification, do not attempt to carry out the replacement yourself, but use the help of professional companies.
We will be happy to replace the assembly. Contact us using the contact form.
Proceed with caution when replacing the circuit board to avoid damaging the device and the associated components. Before replacing the circuit board, disconnect all poles of the instrument from the mains supply (pull out the mains plug)!

SKU:
PART-1007
Shipping weight:
2,00 kg
42,95 € *
9 In stock
Delivery time: 3 - 5 Workdays
In stock

Keyboard contact board 32 note LO for synthesizer.
Original used part in good condition.
The circuit board has been tested by us and is fully functional. You receive a one-year warranty on this board.
The warranty expires after damage to or removal of the void seal, therefore an exchange or return of this board is excluded.

Important information! Electronic assemblies are sensitive to electrostatic charge.
Please observe the regulations on ESD handling.
Replacing the circuit board requires detailed specialist knowledge and may only be carried out by specially trained personnel. If you do not have this qualification, do not attempt to carry out the replacement yourself, but use the help of professional companies.
We will be happy to replace the assembly. Contact us using the contact form.
Proceed with caution when replacing the circuit board to avoid damaging the device and the associated components. Before replacing the circuit board, disconnect all poles of the instrument from the mains supply (pull out the mains plug)!

SKU:
PART-1009
Shipping weight:
2,00 kg
44,95 € *
8 In stock
Delivery time: 3 - 5 Workdays
In stock
Panel button for Roland synthesizer/keyboard. This replacement/spare button is Roland part number 22475656
SKU:
BKS-009
Shipping weight:
0,20 kg
7,49 € *
6 In stock
Delivery time: 3 - 5 Workdays
In stock
Button for switches for Roland synthesizer/keyboard, good condition
SKU:
BKS-020
Shipping weight:
0,20 kg
11,95 € *
2 In stock
Delivery time: 3 - 5 Workdays
Out of stock
Contact Rubber strip 12-note, for synthesizes/keyboards
Before fitting the strips, the rubber contacts and the contacts on the circuit board should be cleaned with a Q-tip and IPA cleaner (99%).
SKU:
RS-010
Shipping weight:
0,20 kg
11,95 € *
Item out of stock
In stock
Contact Rubber strip 13-note, for synthesizes/keyboards
Before fitting the strips, the rubber contacts and the contacts on the circuit board should be cleaned with a Q-tip and IPA cleaner (99%).
SKU:
RS-004
Shipping weight:
0,20 kg
12,95 € *
3 In stock
Delivery time: 3 - 5 Workdays
In stock
Contact Rubber strip 4-note, for synthesizes/keyboards
Before fitting the strips, the rubber contacts and the contacts on the circuit board should be cleaned with a Q-tip and IPA cleaner (99%).
SKU:
RS-005
Shipping weight:
0,20 kg
5,95 € *
4 In stock
Delivery time: 3 - 5 Workdays
In stock
Contact Rubber strip 8-note, for synthesizes/keyboards
Before fitting the strips, the rubber contacts and the contacts on the circuit board should be cleaned with a Q-tip and IPA cleaner (99%).
SKU:
RS-006
Shipping weight:
0,20 kg
8,45 € *
10 In stock
Delivery time: 3 - 5 Workdays
Out of stock

Bender Board for Roland D-50 synthesizer.
Original used part in good condition.
The circuit board has been tested by us and is fully functional. You receive a one-year warranty on this board.
The warranty expires after damage to or removal of the void seal, therefore an exchange or return of this board is excluded.

Important information! Electronic assemblies are sensitive to electrostatic charge.
Please observe the regulations on ESD handling.
Replacing the circuit board requires detailed specialist knowledge and may only be carried out by specially trained personnel. If you do not have this qualification, do not attempt to carry out the replacement yourself, but use the help of professional companies.
We will be happy to replace the assembly. Contact us using the contact form.
Proceed with caution when replacing the circuit board to avoid damaging the device and the associated components. Before replacing the circuit board, disconnect all poles of the instrument from the mains supply (pull out the mains plug)!

SKU:
PART-1021
Shipping weight:
2,00 kg
39,95 € *
Item out of stock
Out of stock
Bender Panel for Roland D-50 synthesizer.
Good used condition with signs of use but no breaks.
SKU:
PART-1025
Shipping weight:
2,00 kg
34,95 € *
Item out of stock
Out of stock
Frontpanel/Faceplate for Roland D-50 synthesizer/keyboard, good condition.
SKU:
PART-1013
Shipping weight:
5,00 kg
44,95 € *
Item out of stock
Out of stock

Jack Board for Roland D-50 synthesizer.
Original used part in good condition.
The circuit board has been tested by us and is fully functional. You receive a one-year warranty on this board.
The warranty expires after damage to or removal of the void seal, therefore an exchange or return of this board is excluded.

Important information! Electronic assemblies are sensitive to electrostatic charge.
Please observe the regulations on ESD handling.
Replacing the circuit board requires detailed specialist knowledge and may only be carried out by specially trained personnel. If you do not have this qualification, do not attempt to carry out the replacement yourself, but use the help of professional companies.
We will be happy to replace the assembly. Contact us using the contact form.
Proceed with caution when replacing the circuit board to avoid damaging the device and the associated components. Before replacing the circuit board, disconnect all poles of the instrument from the mains supply (pull out the mains plug)!

SKU:
PART-1019
Shipping weight:
2,00 kg
39,95 € *
Item out of stock
In stock

LCD-Display for Roland D-50 synthesizer.
Original used part in good condition.
The circuit board has been tested by us and is fully functional. You receive a one-year warranty on this board.
The warranty expires after damage to or removal of the void seal, therefore an exchange or return of this board is excluded.

Important information! Electronic assemblies are sensitive to electrostatic charge.
Please observe the regulations on ESD handling.
Replacing the circuit board requires detailed specialist knowledge and may only be carried out by specially trained personnel. If you do not have this qualification, do not attempt to carry out the replacement yourself, but use the help of professional companies.
We will be happy to replace the assembly. Contact us using the contact form.
Proceed with caution when replacing the circuit board to avoid damaging the device and the associated components. Before replacing the circuit board, disconnect all poles of the instrument from the mains supply (pull out the mains plug)!

SKU:
PART-1024
Shipping weight:
2,00 kg
34,95 € *
1 In stock
Delivery time: 3 - 5 Workdays
Out of stock

Mainboard for Roland D-50 synthesizer.
Original used part in good condition.
The circuit board has been tested by us and is fully functional. You receive a one-year warranty on this board.
The warranty expires after damage to or removal of the void seal, therefore an exchange or return of this board is excluded.

Important information! Electronic assemblies are sensitive to electrostatic charge.
Please observe the regulations on ESD handling.
Replacing the circuit board requires detailed specialist knowledge and may only be carried out by specially trained personnel. If you do not have this qualification, do not attempt to carry out the replacement yourself, but use the help of professional companies.
We will be happy to replace the assembly. Contact us using the contact form.
Proceed with caution when replacing the circuit board to avoid damaging the device and the associated components. Before replacing the circuit board, disconnect all poles of the instrument from the mains supply (pull out the mains plug)!

SKU:
PART-1022
Shipping weight:
2,00 kg
99,95 € *
Item out of stock
In stock

Memory Card Board for Roland D-50 synthesizer.
Original used part in good condition.
The circuit board has been tested by us and is fully functional. You receive a one-year warranty on this board.
The warranty expires after damage to or removal of the void seal, therefore an exchange or return of this board is excluded.

Important information! Electronic assemblies are sensitive to electrostatic charge.
Please observe the regulations on ESD handling.
Replacing the circuit board requires detailed specialist knowledge and may only be carried out by specially trained personnel. If you do not have this qualification, do not attempt to carry out the replacement yourself, but use the help of professional companies.
We will be happy to replace the assembly. Contact us using the contact form.
Proceed with caution when replacing the circuit board to avoid damaging the device and the associated components. Before replacing the circuit board, disconnect all poles of the instrument from the mains supply (pull out the mains plug)!

SKU:
PART-1020
Shipping weight:
2,00 kg
29,95 € *
1 In stock
Delivery time: 3 - 5 Workdays

Items 1 - 20 of 31

Roland D-50

Roland D-50 - Replacement Keys, Spare parts for service and repair.
Roland D-50 is a legendary synthesizer known for its unique sound and digital synthesis. With a wide range of sounds, from classic to modern tones, the D-50 offers numerous creative possibilities for musicians and producers. The D-50 has an easy-to-use interface and is perfect for both studio recordings and live performances.

Looking for spare or replacement parts for your Roland D-50? We have a wide selection of components. Note that not all parts are always available. Check back regularly.

Please contact us if the spare/replacement parts you need are not listed in our store - we may still have them in stock.